In this work we present an advanced computational pipeline for the approximation and prediction of the lift coefficient of a parametrized airfoil profile. The non-intrusive reduced order method is based on dynamic mode decomposition (DMD) and it is coupled with dynamic active subspaces (DyAS) to enhance the future state prediction of the target function and reduce the parameter space dimensionality. The pipeline is based on high-fidelity simulations carried out by the application of finite volume method for turbulent flows, and automatic mesh morphing through radial basis functions interpolation technique. The proposed pipeline is able to save 1/3 of the overall computational resources thanks to the application of DMD. Moreover exploiting DyAS and performing the regression on a lower dimensional space results in the reduction of the relative error in the approximation of the time-varying lift coefficient by a factor 2 with respect to using only the DMD.

%B Advanced Modeling and Simulation in Engineering Sciences %V 7 %G eng %U https://arxiv.org/abs/2001.05237 %N 40 %R https://doi.org/10.1186/s40323-020-00177-y %0 Conference Paper %B 8th International Conference on Computational Methods in Marine Engineering, MARINE 2019 %D 2019 %T Efficient reduction in shape parameter space dimension for ship propeller blade design %A Andrea Mola %A Marco Tezzele %A Mahmoud Gadalla %A Valdenazzi, Federica %A Grassi, Davide %A Padovan, Roberta %A Gianluigi Rozza %XIn this work, we present the results of a ship propeller design optimization campaign carried out in the framework of the research project PRELICA, funded by the Friuli Venezia Giulia regional government. The main idea of this work is to operate on a multidisciplinary level to identify propeller shapes that lead to reduced tip vortex-induced pressure and increased efficiency without altering the thrust. First, a specific tool for the bottom-up construction of parameterized propeller blade geometries has been developed. The algorithm proposed operates with a user defined number of arbitrary shaped or NACA airfoil sections, and employs arbitrary degree NURBS to represent the chord, pitch, skew and rake distribution as a function of the blade radial coordinate. The control points of such curves have been modified to generate, in a fully automated way, a family of blade geometries depending on as many as 20 shape parameters. Such geometries have then been used to carry out potential flow simulations with the Boundary Element Method based software PROCAL. Given the high number of parameters considered, such a preliminary stage allowed for a fast evaluation of the performance of several hundreds of shapes. In addition, the data obtained from the potential flow simulation allowed for the application of a parameter space reduction methodology based on active subspaces (AS) property, which suggested that the main propeller performance indices are, at a first but rather accurate approximation, only depending on a single parameter which is a linear combination of all the original geometric ones. AS analysis has also been used to carry out a constrained optimization exploiting response surface method in the reduced parameter space, and a sensitivity analysis based on such surrogate model. The few selected shapes were finally used to set up high fidelity RANS simulations and select an optimal shape.

%B 8th International Conference on Computational Methods in Marine Engineering, MARINE 2019 %G eng %U https://www.scopus.com/inward/record.uri?eid=2-s2.0-85075395143&partnerID=40&md5=b6aa0fcedc2f88e78c295d0f437824d0 %0 Conference Proceedings %B The 28th International Ocean and Polar Engineering Conference %D 2018 %T An efficient shape parametrisation by free-form deformation enhanced by active subspace for hull hydrodynamic ship design problems in open source environment %A Nicola Demo %A Marco Tezzele %A Andrea Mola %A Gianluigi Rozza %K Active subspaces %K Boundary element method %K Dynamic mode decomposition %K Fluid structure interaction %K Free form deformation %K Fully nonlinear potential %K Numerical towing tank %X In this contribution, we present the results of the application of a parameter space reduction methodology based on active subspaces to the hull hydrodynamic design problem. Several parametric deformations of an initial hull shape are considered to assess the influence of the shape parameters considered on the hull total drag. The hull resistance is typically computed by means of numerical simulations of the hydrodynamic flow past the ship. Given the high number of parameters involved - which might result in a high number of time consuming hydrodynamic simulations - assessing whether the parameters space can be reduced would lead to considerable computational cost reduction. Thus, the main idea of this work is to employ the active subspaces to identify possible lower dimensional structures in the parameter space, or to verify the parameter distribution in the position of the control points. To this end, a fully automated procedure has been implemented to produce several small shape perturbations of an original hull CAD geometry which are then used to carry out high-fidelity flow simulations and collect data for the active subspaces analysis. To achieve full automation of the open source pipeline described, both the free form deformation methodology employed for the hull perturbations and the solver based on unsteady potential flow theory, with fully nonlinear free surface treatment, are directly interfaced with CAD data structures and operate using IGES vendor-neutral file formats as input files. The computational cost of the fluid dynamic simulations is further reduced through the application of dynamic mode decomposition to reconstruct the steady state total drag value given only few initial snapshots of the simulation. The active subspaces analysis is here applied to the geometry of the DTMB-5415 naval combatant hull, which is which is a common benchmark in ship hydrodynamics simulations. %B The 28th International Ocean and Polar Engineering Conference %I International Society of Offshore and Polar Engineers %C Sapporo, Japan %G eng %U https://www.onepetro.org/conference-paper/ISOPE-I-18-481 %0 Journal Article %J The Journal of Open Source Software %D 2018 %T EZyRB: Easy Reduced Basis method %A Nicola Demo %A Marco Tezzele %A Gianluigi Rozza %B The Journal of Open Source Software %V 3 %P 661 %G eng %U https://joss.theoj.org/papers/10.21105/joss.00661 %R 10.21105/joss.00661